参照番号 862
BRAUSSE (BOBST GROUP) PE 1450 SE LARGE FORMAT 2016
動画 1 / 3動画
主要データ
- 製造年
- 2016
- 状態
- 非常に良好
- カテゴリー
- Used Packaging machines · Die cutting machine
技術データ
- 最小用紙サイズ
- 700 x 500 mm
- 最大用紙サイズ
- 1450 x 1100 mm
- 印刷速度
- 5.500 cycles/h
装備
- One 7 mm hardened die cutting plates (HRC 45)
- One die chase with quick locking system
- One set of stripping tools including spring loaded stripping pins etc.
- State-of-art 3 cam index gripper bar drive system to ensure smooth and precise gripper bar intermittent movement
- Triple action movement of the upper and lower stripping frames with lower spring loaded stripping pins
- Upper , middle and lower stripping tool drawer can be pulled out for job set up and make ready
- Complete set of stripping tools with upper and lower stripping pins
- Digital die cutting pressure tonnage display with adjustable pressure limit protection
- Motorized upper frame suspending hoister and can be switched on and off electrically
- Motorized pressure control
- Pneumatic clutch/brake for main drive system
- Pneumatic push button die chase locking mechanism to ensure safe and operator friendly changing of the die
- Precision worm gear crank toggle driving system to ensure smooth and dynamic lower platen movement
- Rear and side joggers with easy position adjustment
- Remote control operating panel for jogging the upper frame up and down, easy and safe stripping tool alignment
- High quality pre-stretched gripper bar drive chain
- Five section brush brake – brake force individually adjustable
- Double cam driven gripper opener and front lay swing frame for smooth and accurate sheet register
- Automatic delivery with nonstop curtain. This curtain moves into the delivery to catch the arriving sheets during the pile exchange
- 1 lower drawer chase
- 1 middle drawer chase
- 1 upper drawer chase
- Air blasting nozzle bar for stretching the thin paper before die cutting
- Automatic die-cutter with stripping device
- Alloy gripper bars with a hard chrome surface made by special process
- Side lays on both sides adjustable for push and pull and for paper and carton
- Synchronizing device to adjust the sheet positioning to the front lay by hand during production
- Suction head with several adjustment possibilities to handle different kind of materials
- Sheet slow down device of feeder belts to assure accurate position of the sheet to the front lays (electro-pneumatically adjustable)
- Self diagnostic system with indication on a color LCD screen
- Radiator cooling for recycling toggle drive lubrication system
- Patent turbo spiral air blower pressing foot at feeder head
- Gripper bar locking levers can be adjusted by micro adjustment screws
- Frontmark control with adjustable density
- Four pick up and six forward suck heads with angle adjustment
- Four individually adjustable front lays with dial read out at the operation side of the machine
- Four electronic front lay controls by means of Omron Glasfiber Optik
- Fine air blast at lead edge for smooth thin paper transport
- Feed in rollers combined with feed belt system, for better feeding of heavier materials or corrugated board
- Ethernet modem for online assistance by problems with electronics
- Each gripper bar can be individually shimmed to ensure very accurate and smooth sheet transport in case of uneven chain stretching after years of production
- CE standard safety systems for safe operation
- Centre line system
- Catwalk with safety rail
- Bullet catcher on the feeder entrance
引き渡し時期・試運転
在庫状況
即納
点検からお客様の工場まで
- 01
ビデオ通話
現地のMACHINEXスペシャリストと機械をライブで確認できます。
- 02
点検
機械を見学するか、詳細な点検報告書を受け取れます。
- 03
見積書
価格、インコタームズ、支払条件を書面で。
- 04
解体
専門的な解体、梱包、コンテナ積み込み。
MACHINEXで購入する理由
点検済みの機械
すべての機械を技術的に点検しています。カウンター写真・銘板・動画(ある場合)。
輸出を一貫対応
解体、梱包、輸送、通関まで。
世界各地で設置
自社エンジニアによる据付。Heidelberg、Koenig & Bauer、Komori、manroland などのブランドに精通。
安心の取引
明確な見積書、インコタームズ、支払計画。